853 research outputs found

    MAXIMIZING AVAILABLE DIVERSITY IN A MIMO FADING CHANNEL

    Get PDF
    The effects of Rayleigh fading on a wireless communications link and the diversity techniques that are available to combat fading are explored in this thesis. The thesis consists of two main portions; an exploration on the use of spatial diversity and an exploration on the use of space-frequency diversity. In harnessing spatial diversity, the use of space-time coding is proposed to combat fading. Several codes of diversity two and four are explored, including Quasi-Orthogonal (QO) codes that are able to achieve a unity rate. The concept of constellation rotation for QO codes to maximize the available diversity is studied. QO codes are shown by simulation to be able to achieve full diversity, despite the fact that the codes are non-orthogonal. The use of space-time-frequency (STF) code to harness both space and frequency diversity is also explored. Simulations were performed for a variety of channel correlations to simulate varying degrees of frequency-selectivity. Results show that STF codes are very effective when the correlations in frequency response are less than 0.5. STF codes also have a power advantage over space-time codes with comparable diversity and bandwidth efficiency.Military Expert 5, Republic of Singapore Air ForceApproved for public release; distribution is unlimited

    The effect of Isoprenyl Ether polymer molecular structure on cementitious composites

    Get PDF
    In order to minimize the rapid flow loss issue from the hot weather or during lengthy periods and long-distance transport, the synthesis of the isoprenyl oxy polyethylene ether (T-PEG) was introduced. However, there were scarce amount of reported literature on the influence of main and side chain densities on the fresh and hardened properties of concrete containing T-PEG polymers. This study was conducted to investigate fresh and mechanical properties of cementitious composites containing T-PEG polymers with different main and side chain densities. These T-PEG polymers were comprised of the density ratio of side chain to main chain of 1:1, 1:1.5, 1:2, 1:2.5 and 1:3.5, respectively. The laboratory tests conducted were marsh cone funnel test, standard consistency, flow retention, flexural strength and compressive strength test. The results obtained showed that the increased density ratio of side chain to main chain of T-PEG improves the fluidity of the cement paste and the flow retention ability of the cement mortar. Consequently, the mortar with T2 polymer proved a better performance on mechanical strength tests. In conclusion, the increasing main to side chain densities ratio of T-PEG polymer imposes a significant influence on the fresh and hardened properties of the concrete material produced

    Prevalence of coronavirus disease 2019 (COVID-19) in different clinical stages before the national COVID-19 vaccination programme in Malaysia: A systematic review and meta-analysis

    Get PDF
    More than 1.75 million COVID-19 infections and 16 thousand associated deaths have been reported in Malaysia. A meta-analysis on the prevalence of COVID-19 in different clinical stages before the National COVID-19 Vaccination Program in Malaysia is still lacking. To address this, the disease severity of a total of 215 admitted COVID-19 patients was initially recorded in the early phase of this study, and the data were later pooled into a meta-analysis with the aim of providing insight into the prevalence of COVID-19 in 5 different clinical stages during the outset of the COVID-19 pandemic in Malaysia. We have conducted a systematic literature search using PubMed, Web of Science, Scopus, ScienceDirect, and two preprint databases (bioRxiv and medRxiv) for relevant studies with specified inclusion and exclusion criteria. The quality assessment for the included studies was performed using the Newcastle–Ottawa Scale. The heterogeneity was examined with an I2 index and a Q-test. Funnel plots and Egger’s tests were performed to determine publication bias in this meta-analysis. Overall, 5 studies with 6375 patients were included, and the pooled prevalence rates in this meta-analysis were calculated using a random-effect model. The highest prevalence of COVID-19 in Malaysia was observed in Stage 2 cases (32.0%), followed by Stage 1 (27.8%), Stage 3 (17.1%), Stage 4 (7.6%), and Stage 5 (3.4%). About two-thirds of the number of cases have at least one morbidity, with the highest percentage of hypertension (66.7%), obesity (55.5%), or diabetes mellitus (33.3%) in Stage 5 patients. In conclusion, this meta-analysis suggested a high prevalence of COVID-19 occurred in Stage 2. The prevalence rate in Stage 5 appeared to be the lowest among COVID-19 patients before implementing the vaccination program in Malaysia. These meta-analysis data are critically useful for designing screening and vaccination programs and improving disease management in the country

    An anatomic gene expression atlas of the adult mouse brain

    Get PDF
    Studying gene expression provides a powerful means of understanding structure-function relationships in the nervous system. The availability of genome-scale in situ hybridization datasets enables new possibilities for understanding brain organization based on gene expression patterns. The Anatomic Gene Expression Atlas (AGEA) is a new relational atlas revealing the genetic architecture of the adult C57Bl/6J mouse brain based on spatial correlations across expression data for thousands of genes in the Allen Brain Atlas (ABA). The AGEA includes three discovery tools for examining neuroanatomical relationships and boundaries: (1) three-dimensional expression-based correlation maps, (2) a hierarchical transcriptome-based parcellation of the brain and (3) a facility to retrieve from the ABA specific genes showing enriched expression in local correlated domains. The utility of this atlas is illustrated by analysis of genetic organization in the thalamus, striatum and cerebral cortex. The AGEA is a publicly accessible online computational tool integrated with the ABA (http://mouse.brain-map.org/agea)

    Barcoding T Cell Calcium Response Diversity with Methods for Automated and Accurate Analysis of Cell Signals (MAAACS)

    Get PDF
    International audienceWe introduce a series of experimental procedures enabling sensitive calcium monitoring in T cell populations by confocal video-microscopy. Tracking and post-acquisition analysis was performed using Methods for Automated and Accurate Analysis of Cell Signals (MAAACS), a fully customized program that associates a high throughput tracking algorithm, an intuitive reconnection routine and a statistical platform to provide, at a glance, the calcium barcode of a population of individual T-cells. Combined with a sensitive calcium probe, this method allowed us to unravel the heterogeneity in shape and intensity of the calcium response in T cell populations and especially in naive T cells, which display intracellular calcium oscillations upon stimulation by antigen presenting cells

    Search for dark matter produced in association with bottom or top quarks in √s = 13 TeV pp collisions with the ATLAS detector

    Get PDF
    A search for weakly interacting massive particle dark matter produced in association with bottom or top quarks is presented. Final states containing third-generation quarks and miss- ing transverse momentum are considered. The analysis uses 36.1 fb−1 of proton–proton collision data recorded by the ATLAS experiment at √s = 13 TeV in 2015 and 2016. No significant excess of events above the estimated backgrounds is observed. The results are in- terpreted in the framework of simplified models of spin-0 dark-matter mediators. For colour- neutral spin-0 mediators produced in association with top quarks and decaying into a pair of dark-matter particles, mediator masses below 50 GeV are excluded assuming a dark-matter candidate mass of 1 GeV and unitary couplings. For scalar and pseudoscalar mediators produced in association with bottom quarks, the search sets limits on the production cross- section of 300 times the predicted rate for mediators with masses between 10 and 50 GeV and assuming a dark-matter mass of 1 GeV and unitary coupling. Constraints on colour- charged scalar simplified models are also presented. Assuming a dark-matter particle mass of 35 GeV, mediator particles with mass below 1.1 TeV are excluded for couplings yielding a dark-matter relic density consistent with measurements

    Measurement of the tt¯tt¯ production cross section in pp collisions at √s=13 TeV with the ATLAS detector

    Get PDF
    A measurement of four-top-quark production using proton-proton collision data at a centre-of-mass energy of 13 TeV collected by the ATLAS detector at the Large Hadron Collider corresponding to an integrated luminosity of 139 fb−1 is presented. Events are selected if they contain a single lepton (electron or muon) or an opposite-sign lepton pair, in association with multiple jets. The events are categorised according to the number of jets and how likely these are to contain b-hadrons. A multivariate technique is then used to discriminate between signal and background events. The measured four-top-quark production cross section is found to be 26+17−15 fb, with a corresponding observed (expected) significance of 1.9 (1.0) standard deviations over the background-only hypothesis. The result is combined with the previous measurement performed by the ATLAS Collaboration in the multilepton final state. The combined four-top-quark production cross section is measured to be 24+7−6 fb, with a corresponding observed (expected) signal significance of 4.7 (2.6) standard deviations over the background-only predictions. It is consistent within 2.0 standard deviations with the Standard Model expectation of 12.0 ± 2.4 fb

    Measurements of Higgs bosons decaying to bottom quarks from vector boson fusion production with the ATLAS experiment at √=13TeV

    Get PDF
    The paper presents a measurement of the Standard Model Higgs Boson decaying to b-quark pairs in the vector boson fusion (VBF) production mode. A sample corresponding to 126 fb−1 of s√=13TeV proton–proton collision data, collected with the ATLAS experiment at the Large Hadron Collider, is analyzed utilizing an adversarial neural network for event classification. The signal strength, defined as the ratio of the measured signal yield to that predicted by the Standard Model for VBF Higgs production, is measured to be 0.95+0.38−0.36 , corresponding to an observed (expected) significance of 2.6 (2.8) standard deviations from the background only hypothesis. The results are additionally combined with an analysis of Higgs bosons decaying to b-quarks, produced via VBF in association with a photon

    Muon reconstruction and identification efficiency in ATLAS using the full Run 2 pp collision data set at \sqrt{s}=13 TeV

    Get PDF
    This article documents the muon reconstruction and identification efficiency obtained by the ATLAS experiment for 139 \hbox {fb}^{-1} of pp collision data at \sqrt{s}=13 TeV collected between 2015 and 2018 during Run 2 of the LHC. The increased instantaneous luminosity delivered by the LHC over this period required a reoptimisation of the criteria for the identification of prompt muons. Improved and newly developed algorithms were deployed to preserve high muon identification efficiency with a low misidentification rate and good momentum resolution. The availability of large samples of Z\rightarrow \mu \mu and J/\psi \rightarrow \mu \mu decays, and the minimisation of systematic uncertainties, allows the efficiencies of criteria for muon identification, primary vertex association, and isolation to be measured with an accuracy at the per-mille level in the bulk of the phase space, and up to the percent level in complex kinematic configurations. Excellent performance is achieved over a range of transverse momenta from 3 GeV to several hundred GeV, and across the full muon detector acceptance of |\eta |<2.7

    Measurements of W+W−+ ≥ 1 jet production cross-sections in pp collisions at s \sqrt{s} = 13 TeV with the ATLAS detector

    Get PDF
    Fiducial and differential cross-section measurements of W+W− production in association with at least one hadronic jet are presented. These measurements are sensitive to the properties of electroweak-boson self-interactions and provide a test of perturbative quantum chromodynamics and the electroweak theory. The analysis is performed using proton-proton collision data collected at p s = 13TeV with the ATLAS experiment, corresponding to an integrated luminosity of 139 fb−1. Events are selected with exactly one oppositely charged electron-muon pair and at least one hadronic jet with a transverse momentum of pT > 30 GeV and a pseudorapidity of |�| < 4.5. After subtracting the background contributions and correcting for detector effects, the jet-inclusive W+W−+ � 1 jet fiducial cross-section and W+W−+ jets differential cross-sections with respect to several kinematic variables are measured. These measurements include leptonic quantities, such as the lepton transverse momenta and the transverse mass of the W+W− system, as well as jet-related observables such as the leading jet transverse momentum and the jet multiplicity. Limits on anomalous triple-gauge-boson couplings are obtained in a phase space where interference between the Standard Model amplitude and the anomalous amplitude is enhanced
    corecore